| 序號 |
器具名稱 |
功能作用 |
| 1 |
含水率檢測儀
Moisture tester |
檢測混凝土基面的含水率，以確定是否適合施工
Check concrete surface moisture to determine applicability |
| 2 |
拉拔實驗儀 Pull-off tester
回彈儀 Rebound hammer |
檢測混凝土基面的粘結強度 Check cohesive strength of concrete substrate
檢測混凝土基面的抗壓強度 Check compressive strength of concrete substrate |
| 3 |
拋丸（噴砂）機
Shot blasting machine |
對混凝土基面進行糙化處理，最理想的處理工具
Roughen concrete substrate, optimal preparation tool |
| 4 |
無塵研磨機
Dust-free grinding machine |
對混凝土基面進行糙化處理
Roughen concrete substrate |
| 5 |
銑刨機
Scarifier |
快速清除不需要之舊涂層等，并使基面糙化
Quick-remove old coatings, also for surface roughening |
| 6 |
抹光機（環氧砂漿用）
Trowelling machine ( Mortar application ) |
施工環氧砂漿，抹平，壓實，以期達到最佳強度
For epoxy mortar application, provide level, dense and high strength mortar floor |
| 7 |
高壓無氣噴涂機
High-pressure airless sprayer |
涂層地坪面層進行噴涂施工，獲得最佳的外觀
Spray top coat paint to gain optimal appearance |
| 8 |
切縫機
Joint cutter |
整齊切開所設伸縮縫并填充彈性體
Cut joint to receive elastic filler |
| 9 |
鏝刀
Trowel |
施工厚涂層
Apply thick coat |
| 10 |
各種滾筒
Roller |
針刺滾筒：消泡 Spike roller : remove bubble
紋理泡沫滾筒：紋理狀面層 Textured roller : achieve textured finish
長毛滾筒：拉毛，底涂 Long pile roller : primer application
短毛滾筒：面涂 Short pile roller : top coat application |
| 11 |
清洗機
Cleaning machine |
清洗已完工面層并進行養護
Clean finished top coat surface and start curing |
| 12 |
電阻機（兆歐表）
Electrical resistance tester |
測定涂層的導電性能
Check conduction property of the coat |
| 13 |
溫濕度計，表面溫度計
Thermo-hygrometer, surface thermometer |
測定施工環境的濕度，測定欲涂基面的溫度
Check environmental temperature, humidity and coated surface temperature |
